Vrinda Media Lab
Articles
Creator Resources4 min read

Riverside recording checklist before you hit record

Riverside records locally, but episodes still go wrong. Run these checks on internet, browser, mic and upload before you record.

Hrishikesh Vasishth

Owner

Podcast host checking microphone and headphone settings before a remote recording

Riverside records each person on their own device, so a shaky call doesn't ruin the files. Episodes still go wrong, though, and it's nearly always for the same few reasons: the wrong mic, a full drive, a tab closed too early. This Riverside recording checklist covers those reasons in the order you'll meet them.

We're writing it from the editor's chair. An editor can fix a lot in a recording. An editor can't fix a track that was never saved, so most of this is about making sure the files exist and sound right before they reach anyone.

Why local recording still needs a check

Local recording protects the quality of your files. It doesn't protect the conversation. If your connection drops, you and your guest still freeze, talk over each other and lose the thread, and no edit puts that back.

Your connection also moves the files. Riverside uploads each person's track to the cloud while you record and finishes after you stop. A slow line means a long wait at the end.

Riverside's own system requirements recommend a download speed above 10 Mbps and an upload speed above 5 Mbps. It also offers a pre-call test you can run in the browser. Use a cable instead of Wi-Fi if you can.

The day before: computer and browser

Do these once, well ahead of the session, so you're not fixing them with a guest watching. None of them takes more than a couple of minutes.

  • Update your browser. Record in a current version of Chrome or Edge. Riverside notes that Safari can't be used for the dashboard or the editor.
  • Check your free space. Riverside recommends at least 5 GB of free space that your browser can use. If you plan to record for more than 1.5 hours, check how much temporary storage the browser has.
  • On a Mac, consider the desktop app. Riverside suggests its Mac app for better performance.
  • Send your guest the same list. Their track is recorded on their computer, so their setup matters as much as yours.

Ten minutes before: the Riverside recording checklist

Run through this every time, even if nothing has changed since last week. Computers switch microphones on their own more often than you'd think.

  1. Plug in. Connect the charger, and the network cable if you have one.
  2. Restart the browser. Riverside recommends closing and reopening it before you record.
  3. Close everything else. That means other tabs and any app that uses your microphone or camera, or that works your computer hard.
  4. Turn off extensions and VPNs for the session. Riverside lists browser extensions, VPNs and firewalls as things to switch off for best results.
  5. Allow the mic and camera. If the browser asks for permission, say yes, then reload the page.
  6. Pick the right mic and headphones. Open the studio settings and choose them by name. Watch the level meter while each person talks. If it barely moves, they're on the laptop mic.
  7. Put headphones on everyone. If one guest has none, switch on echo cancellation for that guest only, not for the whole room.

After you stop: wait for the upload

This is where most lost tracks come from. When you press stop, the recording isn't finished. The last part of each track is still going up.

Leave the Riverside window open until you see "Upload Complete" or "100% Uploaded". Ask your guests to do the same before they leave. Riverside repeats this in its recording best practices, and it's the one step we'd never skip.

[!TIP] If someone closes the tab too early, don't panic and don't clear the browser. Riverside's advice is to open riverside.com/upload on the same computer, in the same browser and profile, and let the upload finish.

What an editor can and can't fix

It helps to know where the line is, because it tells you which checks matter most. This table compares the common problems, what an edit can do about each, and the check that stops it happening.

Everything in the bottom half of the table is prevented by the Riverside recording checklist above. That's the point of running it every time, even when you're in a hurry.

When the files are ready

Once every track shows as uploaded, you can download the separate audio and video files for each person and send them to your editor. Separate tracks give an editor far more room to work than one mixed file.

If you'd like us to take it from there, one team here edits both the picture and the sound. Prices and turnaround are on our services page, and you can see finished episodes on our work page.

Record once, record it right

A Riverside recording checklist takes ten minutes and saves the episode you can't re-record. If you want a second pair of ears on your next one, tell us about your show.

Get a quote

Common questions

What internet speed do I need for Riverside?

Riverside recommends a download speed above 10 Mbps and an upload speed above 5 Mbps. It records locally, so a slower line won't lower file quality, but it will make the live call choppy and the upload slow.

How much free space does Riverside need?

Riverside recommends at least 5 GB of free space that your browser can use. For sessions longer than 1.5 hours, check how much temporary storage your browser has before you start recording.

What happens if I close Riverside too early?

The upload stops before the track is complete. Riverside's advice is to open its upload page on the same computer, browser and profile, then leave it open until the upload finishes.

Can an editor fix bad audio from Riverside?

Partly. An editor can balance levels, reduce steady noise and tidy the conversation. A missing track, a distorted input or a distant laptop mic can't be fully repaired, so check your setup first.

Have a project this applies to?

Send it over. We will tell you what we would actually do with it.